The output of the Apple phone charger is 5V and 1A, where 5V represents the charger's ability to output a stable DC voltage and 1A represents the output current.

The phone head is universal for every phone, but some charging heads have a special fast charging protocol that is suitable for a certain phone brand. But currently, Apple phones are equipped with a 5v 1A charging head, but Apple phones support a 5v 2A charging speed, so as long as you take a 5v 2A charging head, Apple phones can charge twice as fast as before. In addition, the loss of the battery during charging is determined by the number of charging and discharging cycles, not the speed, so it is safe to use it. Usually, the current size can be determined based on the size of the adapter. At the same time, try to use the original charging cable to charge the device, as it will be much faster.

Note: All dimensions are in millimeters

Total height of the male head: 7.4 four foot sinker -10P full chip Apple motherboard - iPhone7/7plus charging plug, data/charging/listening.

Exposed rear cover thickness: 0.9

FPC cable specifications: Four foot sinking board -10P full chip Apple motherboard - iPhone7/7plus charging plug, data/charging/listening.

Cable width: 5.4

Cable thickness: 0.2 four foot sinker -10P full chip Apple motherboard - iPhone7/7plus charging plug, data/charging/listening.

Welding position width: 1.0

Welding position length: 1.5 four foot sinker -10P full chip Apple motherboard - iPhone7/7plus charging tail plug, data/charging/listening to music.

Weld spacing: 1.0

Rated current: 1A four foot sinking board -10P full chip Apple motherboard - iPhone7/7plus charging plug, data/charging/listening to music.